Smooth it onto the right side of the outer fabric.Ĭut out the first piece, and remove the paper dieline Spray the back side of the first paper dieline (file "a") with temporary adhesive.
#Sew art removing stitches under letters free
Wilcom TrueSizer is a free program to use. If you do not have an embroidery software, Open and print each dieline file using an embroidery software. Dielines are used to cut the fabric to the correct shape and size. Some are the embroidery files, and the others are dieline files marked with the letters "DL".
#Sew art removing stitches under letters download
When you download the in-the-hoop zipper pouch design, you will find multiple files. The D-ring strap will be addedĭuring the second file of the embroidery design. This completes the wristlet and the D-ring Of the swivel clasp as possible without hitting it with the needle. Then sew a short seam as close to the flat end Pin the fold or use temporary spray adhesive to hold Fold the fabric loop in half, so the seam is Slide the swivel clasp down until it is restingĪgainst the sewn seam. Now the actual clasp will be on the outside. Put the exposed seam allowance on the inside of the fabric loop, and Trim the seam allowance as much as possible, and Match up the short, raw edges, and sew a 1/4" seam along them. With the clasp still on the inside of the fold, That the actual clasp of the swivel clasp is on the inside of theįold, so when you fold the fabric it ends up inside of the folded Not hit the D-ring as it will break the needle.įor the wristlet strap, slide the 1/2" swivel claspįold the strap in half again, so the swivelĬlasp is right at the fold. To the D-ring and folded end as possible. Using a matching bobbin, sew a small seam as close Pin the fold or use temporary adhesive to hold Side of the D-ring is on the inside of the fold. Center it, and fold the strap so that the flat They shouldįor the D-ring strap, slide the 1/2" D-ring on to The wristlet and the D-ring strap are folded and sewn. Then repeat for the other fabric strip, so both Wind a bobbin with the same thread you are using in the top needle. Spray adhesive to hold the fold in place for sewing.Īs the stitching will been seen from both sides, Press the fold, and then either pin or use temporary Then fold the strip in half by matching up the two, The two long sides over 3/8" with wrong sides together. Take either of the two fabric strips, and fold UsingĪ quilting ruler and a rotary cuter is the easiest way to cut out these Wristlet strap the strip should be cut to 1 3/4" wide x 14" long. For theĭ-ring strap the strip should be cut to 1 3/4" wide x 7" long. Pouch, cut two strips of the outer fabric or the lining fabric. To make a wristlet and D-ring strap for the zipper Soft, fibrous water-soluble stabilizer (such as Vilene) In-the-hoop double sided lined zipper pouch embroidery design - we're stitching theġ/2 yard of quilter's cotton, ultrasuede, or linen (for theġ/2 yard of quilter's cotton (for the lining)ġ/8 yard fabric (for strap or wristlet - optional)Īll-purpose zipper (9" + for small size, 12" + for medium size, It all! Craft a beautifully finished zipper pouch with this Embroidered decoration on both sides - this in-the-hoop project has
0 kommentar(er)
